1、裝運時，進料器應對稱。給料機是提高山東輸送帶運輸和交付過程中平穩,不要太多支線,將導致材料類型管或充滿,然后在機械和設備,不僅危害到所有機械和設備正常運行,環境污染周圍的自然環境,造成不特定操作的設備。

1. The feeder shall be symmetrical during shipment. The feeder is used to improve the stability of Shandong conveyor belt during transportation and delivery. There should not be too many branch lines, which will lead to material type pipe or filling, and then in the machinery and equipment, it will not only endanger the normal operation of all machinery and equipment, but also pollute the surrounding natural environment, resulting in equipment without specific operation.

2、末端的螺旋裝配線須根據機器和設備的具體操作條件進行調整。張力裝置應該調整的時間,保持山東輸送帶應用于正常工作。

2. The spiral assembly line at the end must be adjusted according to the specific operating conditions of the machine and equipment. The tensioning device should adjust the time to keep the Shandong conveyor belt applied to normal operation.

3、輸送帶皮帶為商品提供了很多方便性，這也體現了我們在更自然的環境下對信息內容傳播的要求。在山東輸送帶操作中，隨時做好輸送帶相關的維護保養保養，是很有必要的。

3. Conveyor belts provide a lot of convenience for commodities, which also reflects our requirements for information content dissemination in a more natural environment. During the operation of conveyor belt in Shandong, it is necessary to maintain the conveyor belt at any time.

4、輸送帶皮帶運轉速度普通不宜大于2、5m/s，塊度大，磨損性大的物料和運用固定梨的卸料安裝應盡量采用低速。

4. The running speed of the conveyor belt should not be greater than 2 or 5m/s generally. Low speed should be used as far as possible for the unloading and installation of materials with large lumpiness and wear and the use of fixed pears.

5、滾筒保送機的傳動滾筒直徑與保送帶布層的關系、傳動滾筒、改向滾筒的配套以及對托輥槽角的請求應依據運輸機的設計規則,合理選取。

5. The relationship between the diameter of the driving drum of the drum escort machine and the cloth layer of the escort belt, the matching of the driving drum and the reversing drum, and the requirements for the idler groove angle shall be reasonably selected according to the design rules of the conveyor.

6、給料方向應順保送帶的運轉方向，為減小物料下落時對保送帶的沖擊應采溜槽，減小物料落差間隔；保送帶受料段，應縮短托輥間距和采用緩沖托輥為漏料，保送帶順應采用柔軟適度的擋料板，以免檔料板過硬，刮破保送帶的帶面。

6. The feeding direction shall be in line with the running direction of the walking belt. In order to reduce the impact on the walking belt when the material falls, a chute shall be used to reduce the drop interval of the material; In the material receiving section of the escort belt, the idler spacing shall be shortened and the buffer idler shall be used as the material leakage. The escort belt shall comply with the requirements of using a soft and appropriate baffle plate to prevent the baffle plate from being too hard and scratching the belt surface of the escort belt.

7、保送機在運用時，針對托輥短少，應及時添加及修好，托輥被物料掩蓋，形成回轉不靈，避免漏料卡于滾筒與膠帶之間，留意保送帶活動局部的光滑，但不得油污保送帶。

7. During the operation of the escort machine, due to the shortage of idlers, they should be added and repaired in time. The idlers are covered by materials, resulting in poor rotation, so as to avoid material leakage stuck between the drum and the belt. Pay attention to the smoothness of the moving parts of the escort belt, but do not oil the escort belt.

8、防止山東輸送帶皮帶遭受機架，支柱或塊狀物料的阻滯，避免碰破扯裂，發現保送帶部分破損時，應用人造棉及時修補，以免擴展。

8. Prevent the Shandong conveyor belt from being blocked by the frame, support or block materials, and avoid breaking and tearing. When finding that the part of the conveyor belt is damaged, it should be repaired with artificial cotton in time to avoid expansion.

以上就是今天所要講解的內容了，相信大家在看完本文的描述之后，能夠對該產品有一定的認識和了解，希望以上內容能幫助到你。另外，若你想要了解更多相關資訊，可以多多關注我們的網站動態www.fuli360.com。

The above is the content to be explained today. I believe that after reading the description of this article, you can have a certain understanding of the product. I hope the above content can help you. In addition, if you want to learn more about the relevant information, you can pay more attention to our website, WWW, huafengxiangsu, com.